You should use the remote control within 10m (radio signal scope), or you
may fail to control the main body.
The Cleaner may fail to find the Docking Station due to the obstacle,
complex condition or because the battery’ power used up .
Auto charging docking station
Docking Station Display and Control Panel :
1. LED decorative light (a little essence can be placed above)
2.Decorative light switch
3.Power LED
4.Charging indicator
5. Signal transmitting
6. Charging positive electrode
7. Charging negative electrode
8. Charging power DC socket
Using method & functional status of the docking station
:
No.
Function guide
Function Information
1
LED decorative
light
Turn on the decorative light to activate the atmosphere, and place in the glowing
center of the light a little essence, wich will give off charming aroma after heating.
Function guide
Turn off/cancel/stop
OK key
UV lamp key
Auto Docking Key
▲
Forward key
▼
Backward key
◄ Turn left key
►
Turn right key
Function information
1
．
Turn on the power switch of the cleaner, and press the key can
turn on/off the Cleaner .
2
．
You can stop the running mode by pressing the key .
3
．
You can delete and return to the original setting if you get wrong
sets or want to stop setting.
4
．
Press the key for more than 5s, you can delete all set and memory
and return to the initial status
You must press “OK” to save any setting you did
You can turn on/off UV lamp by pressing the “UV” key while the
cleaner is in the Standby mode or running. The on/off set will be
memorized automatically.
While the Cleaner is in the Standby mode or running, the Cleaner will
search the Docking Station for charging after you press “SUN/DOCK”
key.
Press “Forward”, the Cleaner will run forward cleaning press
can stop. It will stop automatically in case of the obstacle.
Press
▼ for long, the Robot will run backward cleaning, and it will
stop after you release the key.
Press
◄ and release till the Cleaner turn left to the direction you
want. It will stop automatically in case of the obstacle.
Press
► and release till the Cleaner turn right to the direction you
want. It will stop automatically in case of the obstacle.
