H.Koenig KBP40, Instruction Manual

Page: 21 / 176

Drain plug
Drain plug
Fig.2 Fig.3
TROUBLESHOOTING
Problem Possible causes Solution
indicator turns on
1.Low water level or lack of water
2.The water screen at the bottom of
water reservoir is blocked.
3. Pump malfunction.
4.The water inlet of Ice Maker is not
connected with external water
source, or the external water
source is closed.
1. Stop making ice, refill water and then press
key to restart ice-making cycle.
2. Do cleaning.
3. Send it to the authorized department for
repair.
4. Check and make sure the external water
source is connected well or opened.
indicator lights up
1.Ice basket is full and the infrared
light is blocked by the ice.
2. Infrared light-emitting diode &
light-receiving diode do not work
1.Remove the ice from ice basket.
2a. Wipe up the foreign objects on the infrared
light-emitting diode & light-receiving diode and
restart the ice maker.
2b. Call Customer Service if the infrared light-
emitting diode & light-receiving diode still can not
work after wiping up the foreign objects on them
and restarting the ice maker.
indicator blinks
The ice shovel is blocked. Please remove the ice if the ice shovel is blocked
by ice, otherwise, call customer service for
consultation.
The ice maker stops
working.
The ice tray is not in the right position. 1. Remove the ice in the ice tray and press
the “ ” key to restart the appliance.
2. Call Customer Service if the appliance still
can not work after restart.
The ice basket is full but
the “ ” indicator does not
illuminate.
The “ice full” condition can not be
detected as the infrared light module
is interfered by the sunlight.
Unplug the appliance and move it to a place
which is not exposed to the sunlight, then plug
the appliance and activate it again.
The ice collects together. Making ice takes too much time. Stop making ice and restart the ice-making cycle
after the ice melts.