H.Koenig KBP40, Instruction Manual

Page: 15 / 176

BEFORE FIRST USE
1.
Unpack the appliance, then check and make sure
that all the accessories including ice basket and ice scoop
etc. are complete. Please contact with the client service
department if some accessories are missed.
2.
Please ensure the ice maker is level and on a stable
table or platform to avoid malfunction.
3.
The incline angle of the ice maker cabinet should
not exceed 45°during transportation or use. Do not turn
the ice maker upside down. Doing so could cause the
compressor or refrigerating system to operate incorrectly.
Please allow time for the fluids in the compressor to settle
after the ice maker is moved or transported. Before using
the ice maker for the first time, please wait for 2 hours after
the unit has been leveled and positioned in the proper
place.
4.
The appliance must be placed on a dry and level
surface with sufficient ventilation, far from heat sources
such as ovens, heaters and corrosive gases. Leave an 8-
inch (20cm) clearance on all sides of the ice maker for
proper ventilation.
5.
Do not fill the water reservoir with hot water. This
may damage the ice maker. It is best to fill the water
reservoir with water of room temperature or lower.
6.
Do not use the appliance at a very cold environment
(lower than 5
℃
).
7.
Clean the appliance by following the operation of
“CLEANING AND MAINTENANCE”
before operate.
USING YOUR ICE MAKER
1.
Ensure that the drain plug at the bottom of water
reservoir is closed well.
2.
Plug the ice maker into the wall outlet, the
“ ”
indicator blinks.