or the shape is not fit
used skimmed milk
Use whole milk
*
If you have not been able to solve the problem, contact customer support in your country
Note: Purge steam to clean steam nozzle after use, warning hot surface.
D. MAKE HOT WATER
1. Put a stainless steel container under steam nozzle
；
2. Open knob after coffee indicator always lights on, and then hot water is
ejected from the steam nozzle;
3. Close knob when the desired amount is reached.
Note: Check frequently the water level in the tank. Refill if necessary.
Do not touch the hot surfaces of the machine with hands,
especially brewing outlet, steam nozzle when use machine.
E. HEATING LIQUID
1. Use a stainless steel cup, pour cold liquid to 1/2 cup
；
Note: Cup diameter should not less than 70 ± 5mm.
2. Press steam button, it start preheating, and steam indicator is flashing, then
wait for lamp lights on
；
3. Put cup under steam nozzle
；
4. Turn on the knob, release steam
，
let the steam nozzle is inserted into the
liquid;
5. Turn off the knob when the desired temperature is reached.
Note: When steam is stopped, clean the steam nozzle immediately, and
release the liquid in the pipe, to prevent the liquid scaling, because
the surface temperature of steam pipe is very high when in use, be
careful not to be scalded.
INDICATOR TIPS
Coffee
Indicator
Steam
Indicator
Cause
Solution
Flashing
Lights on
Power on
/
Flashing
Lights off
Pre-heating
coffee
/
Lights on
Lights off
Coffee
Pre-heating
finished
/
Lights off
Flashing
Pre-heating
Steam
/
Lights off
Lights on
Pre-heating
finished
/
Flashing
Lights off
Temperature is
too high
Wait temperature naturally
fall or press coffee button
boil water to cooling
Flashing
Flashing
NTC is open
circuit or short
circuit
Please contact with the
authorized service facility
for repairing.
Flashing
Lights off
Making hot water
too long
Turn off the knob
Lights off
Flashing
Making coffee for
too long
Turn off the knob