CONTROL HORNS AND PUSHROD LINKAGES INSTALLATION:
Apply medium CA glue to the surface control horn and stick it into the slot as shown. Once the glue
has set, install a supplied pushrod stopper onto the control horn. In order to get the best mechanical
linkage setup, first of all ensure that the servo control horn is perpendicular to the servo case. Then
connect the pushrod to the servo control horn and connect the pushrod stopper as shown. Get a
piece of masking tape to hold the control surface straight and level and then tighten the grub screw
with a hex-key. Apply a small spot of thread lock glue on the grub screw threads, and trim off the
excess pushrod length with a pair of wire cutters.
7
Summary of Contents for Savage Bobber 1000 mm 5ch ARF Version
Page 1: ...H King Savage Bobber 1000 mm 5ch ARF Version...
Page 2: ......
