16
Assembling the Breast Pump
Complete the following steps carefully to en
sure that the breast pump can achieve the suc
tion effect required.
Insert the valve (13) from below in the pump
housing.
Carefully screw the feeding bottle (12) clock
wise on the thread of the pump housing (3) as
far as possible.
Insert the silicone membrane (4) in the
pump housing (3) as illustrated.
Set the lid (5) on the pump housing (3) as
illustrated.
Carefully screw the lid (5) clockwise on the
thread of the pump housing (3) as far as possi
ble.
Fit the breast shield (2) in the pump hous
ing (3) as illustrated.
Pay attention that the breast shield (2) is
fitted properly and fully against your
breast.
Connect the hose (6) to the vacuum con
nection in the lid (5).
Connect the hose (6) to the vacuum con
nection (22) in the pump unit.
The second vacuum connection is pro
vided with a rubber plug. Do not remove
the rubber plug, otherwise the breast
pump cannot generate a vacuum.
Only use the second vacuum connection
if you want to express breast milk from
both breasts simultaneously, e.g. if you
are the mother of twins.
We recommend
Accessory Kit BS301
. Simply
contact our Service department.
Summary of Contents for BS 300
Page 2: ......
