English
English
23
24
GB
Thank you for choosing this HEYNER® child car seat. When developing our child car seats,
safety, comfort and user-friendliness are most important to us. The manufacturing takes place
under strict quality controls and meets the highest safety requirements.
Please take sufficient time to read and understand these instructions carefully. Only if the seat
is correctly installed, maximum safety and comfort can be achieved.
Please always keep the instruction manual in the storage compartment at the back of the seat.
NOTE
: Because of country-specific requirements the product features may differ.
The recommendation of the vehicle manufacturer must be followed.
1. Important Safety notices
The HEYNER® MultiFix TWIST 2.0 child car seat is tested and approved under the European
Standard for Child Restraint Systems ECE 44/04. You will find the certification mark with the
registration number on the back of the seat, see orange label.
The approval loses its validity, if you make any changes to the seat. This could reduce the safety
or totally take it away.
Please check whether the seat is approved for your car before using it! Never install this child
restraint system on a vehicle seat were the airbag is activated!
The HEYNER® MultiFix TWIST 2.0 must neither be used as a seat nor as a toy in your household.
In case of any other usage there is a danger of injury.
Please take sufficient time to install the seat in your car, as it is described in this manual.
DO NOT use the child seat if it is damaged or if parts are missing. Do not use second hand
products, were it‘s history is unknown to you. Some seat parts may be missing or might be
damaged.
Make sure that all parts of the child car seat are securely stored away, so that they don’t go
missing during daily use or will be jammed between doors or adjustable seats!
The HEYNER® MultiFix TWIST 2.0 should always be secured in the car, even when not in use by
your child.
1.
Important Safety notices ..............................................................................................................................S. 24
2. Placing it onto the vehicle seat. ...................................................................................................................S. 26
3. Uses of the HEYNER® MultiFix TWIST 2.0................................................................................................S. 27
4. Installation ...........................................................................................................................................................S. 28
4.1. Installation of the HEYNER® MultiFix TWIST 2.0 in the vehicle .....................................................S. 28
4.2. Positioning on the vehicle seat ...................................................................................................................S. 28
4.3. Height adjustment of the headrest (A) and the harness straps (SG)
to the size of your child...................................................................................................................................S. 29
4.4. Fastening your child‘s seatbelt ..................................................................................................................S. 30
4.5. Sitting and reclining positions of the child ............................................................................................S. 31
4.6. Rotation .................................................................................................................................................................S. 31
4.7. Removing the child car seat .........................................................................................................................S. 32
5. Care and cleaning ..............................................................................................................................................S. 32
5.1. Removing the cover ........................................................................................................................................S. 32
5.2. Reattaching the cover .....................................................................................................................................S. 33
5.3. After an accident ...............................................................................................................................................S. 33
5.4. Product information .......................................................................................................................................S. 33
5.5. Disposal .................................................................................................................................................................S. 33
6. Some final hints: ................................................................................................................................................S. 34
A
- Headrest
A1
- Head cushion
A2
- Reduction cushion
B
- Shoulder pads
BT
- Base part
C
- Buckle latches
D
- Buckle
DT
- Rotating button
E
- Seat cover
FG
- Installation manual storage
G
- Belt system
G1
- Belt slots
G2
- Harness belts
G3
- Waist belt
G4
- Buckle belt
G5
- Central harness belt
GV
- Harness adjuster
H
- Positioning handle headrest
PG
- Positioning handle
K
- Installation sticker
SG - Connector belts
U
- Diagonal belt of the three-point
vehicle-belt
V
- Buckle latch of the three-point
vehicle-belt
W
- Lap belt of the three-point
vehicle-belt
X
- belt buckle of the three-point
vehicle-belt
AT
- ISOFIX-Button
IA
- ISOFIX-anchors
IH
- ISOFIX-installation aids
IK
- ISOFIX-connector
IM
- ISOFIX-arms
IR
- ISOFIX retract loop
IT
- ISOFIX-release buttons
S
- Support leg
SA
- Support leg indicator
SF
- Support leg adjustment button
