4
Power On the DVR
Please follow the proper power on procedures to avoid damaging the DVR.
•
Connect all necessary components, e.g. monitor and cameras, before power on the DVR.
•
Check the type of power source before connecting the power adaptor to the DVR. The
acceptable power input is between AC110V ~ AC240V.
Select Viewing Mode:
•
Press
MODE
repeatedly to select the wanted display mode. The available viewing modes are
full-screen, 2×2, 3×3, and 4×4 split-window.
•
Press
FREEZE
to pause the current viewing image.
•
Refer to the following for a brief description of some icons that will be shown on the monitor.
Icon Description
Position
Icon Description
Position
►
Playback Mode
Lower-left corner
Key Locked
Center-bottom
N Not Logged-in
Upper-right corner 1~8 User’s Authority Level Upper-right corner
Basic Setup
Enter the OSD main menu and setup some basic configuration of the DVR. The basic configuration
can be set via either the DVR or DVR
Remote
, the remote software.
Enter OSD Main Menu:
•
Press
MENU
to enter the OSD main menu.
•
Enter username and password. The default username and password is
admin
and
1234
.
•
Press
MENU
again to quickly input the default username “
admin
”.
•
It is strongly suggested to change the password to prevent unauthorized access.
Date / Time Setting:
Follow steps below to setup date/time before the recording starts.
•
Select <
Date/Time
> in System Setup menu.
•
Select the date and time using
LEFT/RIGHT
keys; then adjust the value using
UP/DOWN
keys.
•
The new date and time settings take effect after the changes are confirmed.
Language Setting:
If users wish to change language of the DVR system, follow the steps below.
•
Select <
Language
> in System Setup menu and press
ENTER
.
•
Press the
UP/DOWN
keys to select the desired language.
