- 47 -
Data Bit
– press
+/-
buttons to change the value.
Stop Bit
– press
+/-
buttons to change the value.
Parity
– (
Odd
,
Even
, or
None
). Press
+/-
buttons to change the value.
DVR/Camera ID
– for
PTZ
=> the device ID for this digital video/audio recorder, and it must
not conflict with the other devices connected in the same control port. Press
+/-
buttons to
change the ID.
6.10 Network Setup
In Setup Menu display, press
▲▼
to change the highlighted option to
Network
, and then press
ENTER
to call up Network Setup as shown.
The Network Setup allows the administrator to setup all Ethernet network related parameters.
Please check with your network administrator to set these parameters correctly. For most home
users, the typical configuration would connect the DVR to a router to the internet. In those cases,
please see your router user manual for details on how to port forward data and controls to/from the
router to the DVR. In addition, most home users will have dynamic IP addressing. Please use a
dynamic DNS service, such as
http://www.dyndns.com
to access your router and DVR from the
internet.
The general operations are as below:
▲▼
◄►
Press these buttons to select the items.
ESC
Press this button to escape from this screen, and return to Setup Menu display. If the Save
dialog is shown, press
ENTER
to exit and save,
ESC
to exit without saving.
SCW-7704 User Manual
SCW-7704 User Manual