22
whether the sensitivity value and motion area are suitable accordingly
（
refer to following picture
）
; Click
icon, to save the setting; click
icon, exit current interface.
Note: when user drag mouse to set motion detection area, they have to click
icon to clear all
set detection area firstly, and then make the operation.
Step6: user can setup all channels with same parameters, tick off
“all”, then to do relevant setup.
Step7: click
“default” button to resort default setting; click “apply” button to save the setting; click “exit”
button to exit current interface.
②
Schedule
Step1: enter into system configuration
alarm configuration
schedule; refer to Fig 4-24:
Fig3-24 alarm configuration-schedule
Step2: the setup steps of alarm schedule are familiar with schedule; user can refer to 4.4.1 Schedule for
details.
3.4.5 Video loss
Step1: enter into system configuration
alarm configuration
video loss; refer to Fig 4-25:
Fig 4-25 alarm configuration-video loss
Step2: the setup steps of video loss trigger are familiar with alarm handling; user can refer to Chapter 4.5.1
Sensor
alarm handling for more details.
Step3: user can setup all channels with same parameters, tick off
“all”, then to do relevant setup.
Step4: click
“default” button to resort default setting; click “apply” button to save the setting; click “exit”
button to exit current interface.
