GYS SCM54E Manual Download Page 3

12. 

Place the power cords in a location where they will not be stepped on, 
tripped over, or subjected to stress or abuse of any kind. 

13. 

For fuse replacement, contact distributors for replacement.  Any 
tampering or incorrect assembly may result in fire or electric shock 
and voids the warranty. 

14. 

Never attempt to charge a frozen battery.  Allow the battery to 
return to room temperature before connection. Suggested operation 
range is in ambient temperature.     

15. 

Never use SCM54E in or on any boat or watercraft.  You must 
remove the battery from the boat or watercraft and charge the battery 
at the properly installed location of SCM54E unit. 

16. 

Do not install SCM54E where it will be exposed to moisture or 
inclement weather, or around combustibles like trash, flammable 
liquids and vapors. 

 
WARNING    -- RISK OF EXPLOSIVE GASES 

1. 

WORKING IN THE VICINITY OF A LEAD ACID BATTERY IS 
DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES 
DURING NORMAL BATTERY OPERATION. FOR THIS 
REASON, IT IS OF UTMOST IMPORTANCE THAT EACH TIME 
BEFORE USING YOUR SCM54E, YOU READ THIS MANUAL 
AND FOLLOW THE INSTRUCTIONS EXACTLY. 
 

2. 

To reduce risk of battery explosion, follow these instructions and 
those published by the battery manufacturer and manufacturer of any 
equipment you intend to use in the vicinity of the battery. Observe 
cautionary markings on these items.

 

 
PERSONAL SAFETY PRECAUTIONS

 

1. 

Someone should be within range of your voice or close enough to 
come to your aid when you work near a lead acid battery.

 

2. 

Have plenty of fresh water and soap nearby in case battery acid 
contacts skin, clothing or eyes.

 

3. 

Wear complete eye protection and protective clothing.

 

4. 

Avoid touching eyes while working near battery.

 

5. 

If battery acid contacts skin or clothing, wash immediately with soap 

- GB.3-V1 - 

Summary of Contents for SCM54E












Reviews: