20
Using the machine interface
019
Overload, please check your settings
Press and release the trigger to erase
Check the power source settings and installation (welding wire, rol-
lers, gas, torch, etc.)
If the problem persists, update the software (via Planet GYS).
020
Problem with welding start-up
Please check your welding parameters
Press and release the trigger to erase
Check the power source settings and installation (welding wire, rol-
lers, gas, torch, etc.)
If the problem persists, update the software (via Planet GYS).
024
USB overload
Disconnect your USB
Change the USB stick.
-
An internal system error has occurred.
Please restart your product
Turn the product off and on again.
If the problem persists, update the software (via Planet GYS)
-
Calibration error
Recalibrate the welding cables («Calibration» menu)
-
The product’s memory space is full.
Delete Jobs to free up internal storage space.
-
File %s not supported
Err %d
Continue anyway?
The data on the USB stick is corrupted. Check your data.
-
Unable to write to USB stick
Free up some space on the USB key.
If the problem persists, change the USB stick..
-
The USB stick is not recognised. The display of
step 5 of the update procedure does not appear
on the screen (see general instructions).
1- Insert the USB key into its socket.
2- Turn on the power source.
3- Hold down on the HMI thumbwheel to force the update.
If an error code which is not listed appears or your problems persist, contact your distributor.
Summary of Contents for KRONOS 400T DUO
Page 31: ......
