7
GYSFLASH 6.12
EN
• The connection to the power supply must be carried out in
compliance with national standards.
Maintenance:
• If the power cable is damaged, it must be replaced by the
manufacturer, its after sales service or an equally qualified person
to prevent danger.
Regulations:
• Machine compliant with European directives.
• The certificate of compliance is available on our website.
• EAC Conformity marking (Eurasian Economic Community)
Waste management:
• This product should be disposed of at an appropriate recycling
facility. Do not throw away in a domestic bin.
GENERAL DESCRIPTION
The GYSFLASH 6.12 is ideal to charge most lead-acid batteries, often used for cars and many other vehicles. These batteries can
be of many types eg: GEL (gel electrolyte), AGM (absorbed glass mat), WET, MF (Maintenance Free), CA (Calcium)...
This charger has been designed to charge 12V batteries (6*2V elements) from 1.2 Ah to 125 Ah, or for floating charge up to 170
Ah.
START UP
1. Connect the charger to the battery using the proper accessory (clamps, lugs, etc...).
2. Plug the charger to the mains (single phase 220-240Vac 50-60Hz).
3. Select the mode by pressing the
button. After roughly 5 seconds, the charge starts automatically.
4. During the charge, the device indicates the charge’s progress. When the indicator
blinks, the battery is ready to start the
vehicle. Once the indicator
stays on, the battery is completely charged.
5. The charge can be interrupted at any time by unplugging the mains plug or pressing the
button.
6. After charging, disconnect the charger from the mains, then disconnect the charger’s connections from the battery.
CHARGE MODES
• Modes and Options:
CHARGE mode (14.4V/0.8A) :
Mode designed for lead-acid batteries, 12V from 1.2 Ah to 15Ah. 8 step automatic maintenance cycle.
CHARGE mode (14.4V/6A) :
Mode designed for lead-acid batteries, 12V from 15 Ah to 125 Ah and up to 170 Ah for floating charge. 8 step auto-
matic maintenance cycle.
COLD/AGM Option (14.7V) :
Modifies the charging voltage at 14.7V to charge the battery during cold weather (Less than 5°C) or for
some AGM batteries or batteries with caps.
REFRESH Option (15.8V):
Option which add an extra step (step 7) to the charge cycle to restore deeply discharged batteries.
: this option is not recommended for charging sealed batteries.
Recommendation: Check the battery’s water level and if necessary, perform with a Refresh charge.
