15
CARMIG
EN
The welding cord is porous.
The gas flow is not sufficient.
Adjusting range 15 to 20 L / min.
Clean the working metal.
Gas bottle empty.
Replace it.
Gas quality non-satisfying.
Replace it.
Air flow or wind influence.
Avert air blast, protect welding area.
Gas nozzle too full.
Clean or replace the gas nozzle.
Bad wire quality.
Use adapted WIRE for MIG-MAG welding.
Surface to weld in bad condi-
tion. (rust, etc…)
Clean the working parts before welding.
Very significant flashing
particules.
Arc voltage too low or too
high.
See welding settings.
Bad earth connection.
Check and place the earth cable to have a better
connection.
Protecting gas insufficient.
Adjust the gas flow.
No gas at the torch output.
Bad gas connection.
See if the gas coupling beside the engine is well
connected.
