8
GYSFLASH 20.12/24 PL
EN
Connection :
• Class II device
• The connection to the power supply must be carried out in
compliance with national standards.
Maintenance :
• If the power cable is damaged, it must be replaced by the
manufacturer, its after sales or by an equally qualified person to
prevent any accidents.
Regulations :
• The Machine is compliant with European directives.
• The declaration of conformity is available on our website.
• EAEC Conformity marking (Eurasian Economic Community).
Waste management:
• This product should be disposed of at an appropriate recycling
facility. Do not throw away in a household bin.
GENERAL DESCRIPTION
GYSflash 20.12/24 PL is designed to charge lead-acid batteries (Gel, AGM, Liquid, ...) and Lithium Iron Phosphate (LFP / LifeP04).
This charger is suitable to recharge :
- Lead-acid batteries 12V (6 elements in series) from 15 Ah to 375 Ah.
- Lead-acid batteries 24 V (12 elements in series) from 15Ah to 240Ah.
- Lead-acid batteries LFP 12V (4 elements in series) from 7Ah to 300Ah
- Batteries LFP 24V (8 elements in series) from 7Ah to 240Ah
GYSFLASH 20.12/24 PL is equipped with an integrated temperature sensor to adjust the charging current
based on the ambient temperature for an optimal charging performance. This adjustment ensures a highly
precise charge, relative to the temperature of the room.
START UP
1. Connect the charger to the battery.
2. Plug the charger to the mains (single phase 220-240Vac 50-60Hz).
3. Select the mode by pressing button
), and the charging current by pressing button
. After roughly five
seconds, the charge starts automatically. By default, the charger starts on the last mode used.
4. During the charge, the device indicates the charge progress. When indicator
blinks, the battery is ready to start the vehicle.
Once indicator
stays on, the battery is fully charged.
5. The charge can be interrupted at any time by unplugging the mains plug or pressing the
button.
6. After the charge, disconnect the charger from the mains, then disconnect the clamps from the battery.
CHARGE MODES
• Description of charging modes and currents :
Mode CHARGE lead-acid (14.6 V/20 A max) :
Mode designed for the recharge of 12V lead-acid batteries from 15 Ah to 300 Ah. Automatic seven step
charge cycle.
Mode CHARGE lead-acid (29.2 V/15 A max) :
Mode designed for the recharge of 12V lead-acid batteries from 15 Ah to 240 Ah. Automatic seven step
charge cycle.
Mode CHARGE Lithium (14.4 V/20 A max) :
Mode designed for the recharge of 12 V lithium batteries from 7 Ah to 300 Ah. 8 step automatic mainte
-
nance charge cycle.
