7
GYSFLASH 20.12/24 PL
SAFETY INSTRUCTIONS
This manual contains safety and operating instructions, to be followed
for your safety. Please read it carefully before using the device for the
first time and keep it for future reference.
This machine should only be used for charging or power supply
operations comprised within the limits indicated on the machine
and in the instructions manual. The operator must observe the safety
precautions. In case of improper or unsafe use, the manufacturer
cannot be held liable.
The device is destined to be used indoors. Must not be exposed to
the rain.
This unit can be used by children aged 8 or over and by people with
reduced physical, sensory or mental capabilities or lack of experience
or knowledge, if they are properly monitored or if instructions for
using the equipment have safely been read and risks made aware of.
Children must not play with the product. Cleaning and maintenance
should not be performed by an unsupervised child.
Do not use to charge domestic batteries or non rechargeable
batteries.
Never use on a frozen or damaged battery.
Do not obstruct the machine's air intake, which facilitates air
circulation.
The operating mode of the automatic charger and the restrictions
applicable to its use are explained later in this manual.
Fire and explosion risks!
A charging battery can emit explosive gases.
• During the charge, the battery must be placed in a well ventilated
area.
• Avoid flames and sparks. Do not smoke near the device.
• Protect the battery's electrical contact surfaces against short-
circuits.
Connection / disconnection :
• Ensure that the charger's power supply is disconnected before
connecting or disconnecting to the battery terminals.
• Always ensure the Red clamp is connected to the ""+"" battery
terminal first. If it is necessary to connect the black clamp to the
vehicle chassis, make sure it is a safe distance from the battery
and the fuel/exhaust pipe. The charger must be connected to the
mains.
• After charging, disconnect the charger from the mains, then
disconnect the negative clamp from the car body and then
disconnect the positive clamp from the battery, in this order.
EN
