50 / 60 Hz
Icharge
V
Charge
Maintenance
Ondulation/
Ripple
Charging
curve
kg
mm
mm
IP
220-240 V AC 195 W
12 A 12 V 20 < 250 Ah 20 < 330 Ah
<0.4 Ah/
month
<100 mV
Rms
IU
0
U
8 step
1.1
221 x 111
x 58
195 x 365
x 70
Automatic
>2V
IP 65
2 m
GYSFLASH 12.12
MADE in
CHINA
- EN 60335-2-29
Ref. 029392
• The
8 step charging curve
ensures maximum battery performance and longevity.
•
External temperature sensor,
for an optimal battery charge whether it’s summer or
winter. The charger adjusts the charging curve depending on ambient temperature.
• It recovers deeply discharged batteries >2V
(SOS Recovery
).
HIGH PERFORMANCE CHARGE
BATTERY
CHARGER
12V
The GYSFLASH 12.12 is specifically designed to charge all types of’ 12V batteries such as cars, utility
vehicles, motor homes, buses or commercial vehicles. It features an 8 step intelligent charging curve for
an optimal charge; as well as a «Supply» mode to support and maintain showroom vehicle batteries.
1
Analysis
2
Recovery
3
Test
4
Desulfation
5
Charge
6
Absorption
7
Refresh (option)
8
Floating charge
•
Designed for 12 V batteries from 1.2 to 250 Ah,
or for maintenance charging up to 330 Ah.
•
2 charge modes
for maximum versatility :
- AGM :
Charge mode for cold weather
(less than 5°C)
and for Start & Stop batteries
(EFB & AGM).
- Refresh
:
Recovers deeply discharged batteries.
•
Supply mode
, transforms the charger into a stabilised power supply :
- maintains battery health during vehicle demonstrations
(showroom)
.
- preserves memory settings during battery replacement.
•
Optimised maintenance charge
, the charger can remain plugged in indefinitely during
winter to maintain the health of the battery. «Auto Restart» feature so the charger can
restart automatically with the right settings after a power cut.
IDEAL FOR CARS AND 12V COMMERCIAL VEHICLES
•
Protection of the vehicle’s on-board electronics:
protection against short circuits, polarity
reversal and overcharging. Anti-spark technology.
•
Automatic stand-by mode
if the battery is disconnected.
•
Integrated temperature probe
to prevent internal electronics’ overheating.
•
Simplified interface
to prevent user error.
SAFETY / PROTECTION FOR VEHICLE ELECTRONICS
• Ultra-compact design, light and portable.
• Resistant to dust and water ingress (IP65 - not waterproof).
• Can be attached to a wall.
ERGONOMIC
www.gys.fr
1
2
3
4
5
6
7
8
REFRESH
U
I
Supplied with :
Clamps
(45 cm)
