7
GYSFLASH 1.12
EN
Connection:
• Class II device
• The connection to the power supply must be carried out in
compliance with national standards.
Maintenance:
• If the power cable is damaged, it must be replaced by the
manufacturer, its after sales service or an equally qualified person
to prevent danger.
Regulations:
• Machine compliant with European directives.
• The certificate of compliance is available on our website.
• EAC Conformity marking (Eurasian Economic Community)
Waste management:
• This product should be disposed of at an appropriate recycling
facility. Do not throw away in a domestic bin.
GENERAL DESCRIPTION
The GYSFLASH 1.12 is ideal to charge most small lead-acid batteries, often used for cars and many other small vehicles such as
motorbikes, scooters, watercrafts... These batteries can be of many types eg: GEL (gel electrolyte), AGM (absorbed glass mat),
WET, MF (Maintenance Free), CA (Calcium)...
This charger has been designed to charge 12V batteries (6*2V elements) from 1 Ah to 32 Ah, or for floating charge up to 100 Ah.
START UP
1. Connect the charger to the battery using the proper accessory (clamps, lugs, etc...).
2. Plug the charger to the mains (single phase 220-240Vac 50-60Hz).
3. During the charge, the device indicates the charge’s progress. When the indicator
blinks, the battery is ready to start the
vehicle. Once the indicator
stays on, the battery is completely charged.
4. After charging, disconnect the charger from the mains, then disconnect the charger’s connections from the battery.
