6
(1)
Paste the installation positioning sticker on the wall and align the cross
center to the hole on the wall.
(2)
Lead the cables across the hole on the wall.
2.
Drill holes on the wall.
Use a
φ
6-6.5mm drill bit to drill 30mm-depth guide holes according to the positions
marked by the sticker.
3.
Mount the plastic anchors of self-tapping screws.
Knock the plastic rivets into the guide holes and ensure that they are tightened up.
1
2
Lead the cables across the hole
on the wall.
Paste the installation positioning
sticker on the wall and align the
cross center to the hole on the wall.
Use a Ø6-6.5 mm drill bit to drill 30 mm-
depth guide holes according to the
positions marked by the sticker.
r k
Knock the plastic anchors into
the guide holes and ensure that
they are tightened up
.
