4
⚫
Do not aim the lens to any strong light source such as the sun or an incandescent
lamp. It may cause permanent damage to the lens.
⚫
During transportation, special attention is required to protect the transparent
dome cover from friction, scratch and stain, etc. Do not remove the protective
film from the cover until mounting is finished. Remove the protective film before
powering on the device.
⚫
Handle the device with care during transportation, storage and installation.
Avoid excessive pressure and vibration. Keep the device away from vibration
sources. Protect the cables and connectors from damage. Make sure the device
is always properly grounded.
2.2
Maintenance
⚫
If there is dust on the front glass surface, remove the dust gently using an oil-
free brush or a rubber dust blowing ball.
⚫
If there is grease or a dust stain on the front glass surface, clean the glass surface
gently from the center outward using anti-static gloves or an oil-free cloth. If the
grease or the stain still remains, use anti-static gloves or an oil-free cloth dipped
with detergent and clean the glass surface gently until it is clean.
⚫
Do not use organic solvents (such as benzene and alcohol) to clean the
transparent dome cover.
3
Appearance
3.1
Dimensions
The appearance may vary with device model.
3.2
Cable Connection
All cables are tagged to indicate their functions separately. The tail cable may vary
with device model.
244mm
9.6"
150mm
5.9"
7
4
m
m
2
.9
"
76mm
3.0"
4-Ø4mm
0.2"
76
m
m
3.
0"
