5
MINI BIKE 2.0
ASSEMBLY INSTRUCTIONS
STEP 1
Install Front Stabilizer (2) and Rear Stabilizer (2) to Main Frame (1) by Dome Nuts (4), Washers (5) and
Bolts (6) that are pre-fixed on the stabilizers. Then screw down the Dome Nuts (4) by Open End Wrench (7).
STEP 2
The pedals are marked with L & R marks.
Insert the pedal shaft of Left Pedal (3) into threaded hole in the left Crank (L). Turn the pedal shaft by hand
in the counter-clockwise direction until snug. Insert the pedal shaft of Left Right (3) into threaded hole in
the right crank (R). Turn the pedal shaft by hand in the clockwise direction until snug. Tighten by Open End
Wrench (7).
NOTE:
DO NOT turn the pedal shafts in the wrong direction, doing so will strip the threads.
