1 - Backrest
2 - Seat
3 - Handle for carrying the unit
4 - Device stand
5 - Backrest tilt adjustment
6 - Seat height adjustment
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The unit should be placed on a hard, flat and dry surface. The adjacent surface
should be non-slip. Leaving a free space of 2000mmx2000mm around the unit is
recommended.
ASSEMBLY OF THE UNIT
In order to properly assemble the unit you should prepare and use the following
tools
1.
M6 wrench
2.
Two 17/19" wrenches
The assembly of the unit should follow the sequence shown in the illustrations
below. Grouping the components together before assembly is recommended.
