Gymna Pulson 100, User Manual

Page: 8 / 45

Pulson 100
6
1.2.2 Electrical safety
1.2.3 Prevention of explosion
1.2.4 Electro Magnetic Compatibility
1.2.5 Ultrasound therapy
•
Only use the equipment in an area with facilities that meet the
applicable legal regulations.
•
Connect the equipment to an outlet with a protective earth
terminal. The outlet must meet the locally applicable
requirements for medical areas.
•
Do not use the equipment in an area where combustible
gases or vapours are present.
•
Switch off the equipment when it is not used.
•
Medical electrical equipment requires special precautions for
Electro Magnetic Compatibility (EMC). Follow the instructions
for the installation of the equipment.
See §2
•
Do not use mobile telephones or other radio, shortwave, or
microwave equipment in the vicinity of the equipment. This
kind of equipment can cause disturbances.
•
Only use the accompanying accessories that are supplied by
GymnaUniphy.
See §7.5 and §7.6 .
Other accessories can lead to an increased emission or a
reduced immunity.
•
Move the US head evenly over the skin during the treatment.
This prevents internal burns.
•
The US treatment heads are exchangeable. The device
detects the characteristics and supplies the right power at the
right frequency.
•
Handle the US heads carefully. With rough handling, the
characteristics can change. Test the US head if it falls on the
ground or knocks against something.
See §5.1.1 .
•
Check the US head at least once a month. During the check,
look for dents, cracks and other damage that could allow
liquids to ingress. Check whether the insulation of the cable is
still intact. Check whether all pins are present and straight in
the connectors. Replace the US head if the head, the cable or
the connector is damaged.
See §5.1 .
OBJ_BUCH-61-002.book Page 6 Wednesday, October 3, 2007 10:28 AM