Gymna Pulson 100, User Manual

Page: 33 / 45

Pulson 100
31
8 A
PPENDICES
8.1 EMC directive
Use only US heads that are specified in this manual. See §7 . The use of
other accessories can have a negative effect on the electromagnetic
compatibility of the equipment.
If you use the Pulson 100 in the vicinity of other equipment, you must
check that the Pulson 100 is functioning normally.
The following paragraphs contain information about the EMC properties of
the equipment. Because this information is intended for technicians, the
information is given in English.
8.1.1 Guidance and declarations
Guidance and manufacturer’s declaration - electromagnetic emissions
The 100-series devices are intended for use in the electromagnetic
environment specified below. The customer or the user of a 100-series device
should assure that it is used in such an environment.
Emission test Compliance Electromagnetic environment -
guidance
RF emissions
CISPR 11 Group 1 The 100-series devices use RF energy only for
their internal function. Therefore, their RF
emissions are very low and are not likely to cause
any interference in nearby electronic equipment.
Class B The 100-series devices are suitable for use in all
establishments, including domestic
establishments and those directly connected to
the public low-voltage power supply network that
supplies buildings used for domestic purposes.
Harmonic
emissions
IEC 61000-3-3
Class B
Voltage
fluctuations/flicker
emissions
IEC 61000-3-3
Complies
OBJ_BUCH-61-002.book Page 31 Wednesday, October 3, 2007 10:28 AM