5
IMPORTANT ASSEMBLY INFORMATION
Tools Required for Assembly: Two Adjustable Wrenches and Allen Wrenches.
NOTE: It is strongly recommended that this equipment is assembled by two or more
people to avoid possible injury.
Always wait until all bolts are assembled onto the unit before tightening the bolts. Do not
tighten each bolt right after it is installed, tighten according to the signs below.
Fasten Nuts and Bolts
Securely tighten all Nuts and Bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivoting function.
Make sure all pivoting components are able to move
freely.
Do not tighten all Nuts and Bolts in this step.
CARE AND MAINTENANCE
1. Periodically inspect all parts. Check all nuts and bolts every week for tightness and tighten as
required.
2. Replace any worn or damaged part immediately. Check all covers over tubes or sharp
edges weekly to be certain they are in place. Replace when necessary.
3. Cover the equipment with tarp when left outdoors.
4. Use mild household spray cleaners and/or a damp rag to wipe clean. Do not use harsh
cleaning chemicals.
5. Sand rusted areas on tubular members and repaint using a non-lead based paint meeting the
requirements of Title 16 CFR Part 1303.
6. Disposal Instructions – The equipment can be safely disassembled and disposed without
unreasonable hazards. Call your local recycle agency regarding details of recycling.
7. During the play season, rake and check depth of loose fill protective surfacing materials twice
a month to prevent compaction and to maintain appropriate depth.
8. At the end of each play season or when temperature drops below 32°F, store the equipment
in a cool dry place.
9.
Failure to examine regularly may affect the safety level of the equipment.
WEIGHT CAPACITY AND DIMENSION
1. Maximum weight capacity: 70 lbs.
2. Assembled Dimension: 48” x 31” x 36”
3. Space required to operate this equipment: 11 ft x 11 ft
Summary of Contents for BTT
Page 8: ...7 EXPLODED DIAGRAM ...
Page 9: ......
Page 10: ...STEP2 1X M12 160 Ø12 M12 2X M10 70 Ø10 Ø12 ...
Page 12: ...STEP3 1X M10 130 Ø10 M10 Ø10 ...