11
keeP aWaY from sources of heat
Keep the tent and add-on pieces such as the SunShade away from sources of heat and
open flames. Please do not place any sources of heat directly under the roof or the
SunShade because the materials can melt at high temperatures.
Protect from strong WinDs
The GYBE SunShade should not be used at wind speeds over 5 Beaufort (21 knots / 38 km/h).
Generally speaking, the side flares should be unfurled and pinned down to stabilize
the tent against wind loads!
→ GYBE does not accept any liability for improper use of GYBE products.
carE iNstructioNs
store in a DrY Place
Never store the SunShade when it is wet. Ensure that the SunShade is kept dry and
at a temperature ranging from 0 – 30 °C. (32 – 90° F.).
clean carefullY
Rough, dry dirt is best removed with a fine hand brush or a wet cloth.
Crusted residues with sharp edges can damage the tent fabric.
The materials should only be cleaned with clear water or with highly diluted detergent.
Handle printed materials especially carefully. If you have any doubts, check on an
inconspicuous spot if the cleaning agent reacts corrosively with the tent surface.
Some of the SunShade materials are coated with water-resistant and flame-retardant
layers. Strong scrubbing or solvent-containing cleaning agents can ruin these layers!
→ GYBE does not accept any liability for improper use of GYBE products.
NotEs oN usE aND safEtY
EN
