29
Step
2
Check
“
Enable
”
to turn on the Motion Detection function
，
then check
“
Alarm Output
”
and
“
Record Video
”
, depending on different circumstances.
Alarm Output: check this function to generate an alarm output signal to trigger the related alarm output
devices.
Record Video: check this function to record video when a motion detection alarm is triggered.
Step 3 Click
“
Regional Edit
”
opens a pop up screen that can be used to set detection areas.
Use the mouse to select detection areas. Areas with blue squares are selected.
Sensitivity: the higher the sensitivity, the less movement is required to trigger a motion event.
The lower the sensitivity, the more movement is required to trigger a motion event.
Threshold: the level that the motion detection needs to reach in order to trigger detection.
The lower the threshold, the more likely that motion will trigger detection.
Full Screen: one-click to select all areas for motion detection.
Clear Screen: one-click to remove all areas for motion detection.
Step 4 Click
“
Save
”，
then click to complete the configuration.
Step 5 Set up "Alarm Duration", "Pre-record Time", "Record Time" for different circumstances.
Alarm Duration: when alarm triggered, the alarm duration will last for a certain period. (range from 5 to 300
seconds) The alarm will not be triggered again till this period is ended.
Pre-record Time: this field specifies in seconds how long the surveillance footage is recorded before motion
