PSM-SERIES PROGRAMMABLE POWER SUPPLY
USER MANUAL
24
z
AUTO RANGE
AUTO RANGE Setting method: Press [SHIFT][AUTO RANGE] , use
knob to select the item for setting change.
For example: Set the AUTO RANGE to: START : 00 ; CEASE : 99 ;
CYCLE : 99999
。
Press [SHIFT][AOTU RANGE] to enter AUTO RANGE setting item
selection, first select START and press [ENTER], then input [0][0]
[ENTER] to complete the change. Then input [9][9][ENTER] to CEASE
setting item to complete CEASE setting. Furthermore, input [9][9][9][9][9]
[ENTER] to CYCLE setting item to complete CYCLE setting. After
proceeding above setting, select SAVE to store the setting or select EXIT
to exit the setting without storing.
PSM-SERIES PROGRAMMABLE POWER SUPPLY
USER MANUAL
25
z
STORE : Save the setting data to one of the memory groups
STORE setting method: Press the function of [STORE], use knob or
number key to input the memory address to save the data.
For example: Store the setting date to the memory address of 01.
Press [SHIFT][STORE] to get into STORE setting, then input
[0][1][ENTER] to complete the Store.
z
Rotary Encoder : The wheel knob for number input or function
selection.
The function knob can be used for number input or function selection.
When the knob is used as number input, it should be matched with the
cursor moving keys [<] and [>].
z
[<] and [>]:
[<] and [>] are cursor moving keys for number input or
function selection.
z
LOCAL(GPIB/RS-232) : Clear the Remote Control mode and use the
panel control mode instead. Press [SHIFT][GPIB/RS-232] to GPIB
or RS-232 setting selection.
Press [LOCAL] function can clear Remote Control mode and use panel
control instead. After press [SHIFT][GPIB/RS-232], use knob to select
