WWW.GVISION-USA.COM
30398 Esperanza, Rancho Santa Margarita CA 92688 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. [email protected]
18
PVM
Image Mode
Press “< or >” button to set image mode, three are three modes. (Off,
Switch and Motion) Finally, press “Menu” button to exit.
Motion Time
When you select the motion mode, you could set the motion time.
When there is no motion detected for a defined second, the monitor
will return to the previous channel.
Switch Timer
When you select the switch mode, you could set the switch timer.
There are three input sources, you could set the time for each source
from 0 to 30 second. Finally, press “Menu” button to exit.
Special Ctrl
Press “>” button to set message select, message flicker and led flicker.
And there are four modes in message “RECORDING IN PROGRESS” or
“WELCOME”. And you could set on/off in the message flicker and led
flicker. And press “Menu” button to exit.
