3
Read this manual thoroughly before first use, even if you are familiar with this type of product.
The safety precautions enclosed herein reduce the risk of fire, electric shock and injury
when correctly adhered to.
Keep the manual in a safe place for future reference, along with the warranty card, purchase
receipt and carton.
Electrical safety and cord handling
• Connect the appliance to a single-phase AC supply of the voltage specified on the rating
plate; the socket must stand a minimum 10A load, use a safe socket with an earthed
connection.
• Always plug this heater into a separate power point. Do not use it with an extension cord
as this may overheat and cause a risk of fire.
• Do not place the heater immediately below an electrical outlet.
• To ensure you do not overload the electrical circuit, make sure that no other appliance is
in use on the same electrical circuit as the heater.
• Protect the heater from moisture. Never touch the heater with wet or damp hands or
feet. Never expose it to water (including rain) or other liquids. Never use the heater in the
immediate surroundings of a bath, shower or swimming pool, or anywhere it may fall into
a bathtub or any other water container.
• Always place the heater in an upright position and on a stable surface.
• Do not operate the heater with a damaged cord or plug, or after the heater malfunctions,
has been dropped, or damaged in any manner.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard. In case of damage, contact the
after sales support line for advice on return or repair.
• Protect the power cord.
Do not put it on top of the heater, or expose it to hot surfaces.
Do not put any stress on the power cord where it connects to the product, as the power
cord could fray and break.
• Do not run the cord under carpeting or cover it with throw rugs, runners etc. Arrange the
cord away from traffic areas and where it will not be tripped over.
• Never leave the heater unattended while it is in use. Always switch it off and unplug it
from the power point when not in use and before moving it.
• To disconnect the heater, turn it off and then remove the plug from the electrical outlet.
Grip the plug when disconnecting, do not pull on the cord.
Important Safety Instructions