GVA GVAOR7F Instruction Manual Download Page 10

10

Care and Maintenance 

Care and Maintenance

WARNING!

• 

Always set all controls to the OFF position, remove the plug from the socket outlet and 
allow the heater to cool down completely before cleaning it.

• 

Never immerse the heater in water. Never allow the interior to get wet.

• 

Do not use any chemical cleaners such as detergents or solvents, or abrasives, on any 
part of the heater. 

1.  To clean dust and dirt off the heater, only wipe it with a soft cloth, moistened, if 

necessary, but not wet. 

2.  When the heater is not in use, make sure it is unplugged from the wall socket.
3.  To store the heater, we recommend removing the castor wheels and packing it in its 

original carton. Storing it in a cool and dry place, out of children’s reach, until later use. 

4.  In case of a malfunction or if in doubt, do not try to repair the heater yourself, it may 

result in a fire hazard or an electric shock. Call the after sales support line for advice.

NOTE: Unless your home is already fitted with a residual current device (safety switch), we 
recommend installing an RCD with a rated residual operating current not exceeding 30mA to 
provide additional safety protection when using electrical appliances. See your electrician for 
professional advice. 

Summary of Contents for GVAOR7F












Reviews: