GVA GVA32DLEDV, Instruction Manual

Page: 20 / 47

20
Getting Started
IMPORTANT! Before connecting the unit to a wall socket and turning on the power, make sure
the power cord and all connected equipment are properly connected.
Powering the TV
To turn the power ON or OFF:
• Insert the plug of the power cord into an appropriate power point and switch on power
to the outlet.
• Press the POWER button at the bottom of the front panel, or on the remote control,
making sure to aim it at the sensor at the front of the TV; the indicator will glow blue.
Press it again to power off (standby mode); the indicator will glow red.
First use
When you switch on the TV for the first time, the First Time Installation menu will be
displayed on the screen, as illustrated below.
• OSD language: Use the
/
buttons to select your OSD language and then use the
button to go to the next item.
• Country: Use the
/
buttons to select the country you are living in and then use the
button to go to the next item.
• Auto scan: Use the
/
buttons to select the type of scan (ATV, DTV, DTV + ATV) and then
use the button to select Start.
• Press OK to begin scanning for stations.
• To exit channel tuning, press the EXIT button and use the
/
buttons to select YES; select
NO to continue tuning.
• When auto searching is complete, your TV will show the first channel found.