GVA GVA32DLED, Instruction Manual

Page: 22 / 47

22
1. Press
/
button to select the option that you want to adjust in the
PICTURE
menu.
2. Press
OK
button to adjust.
3. After finishing your adjustment, press
MENU
button to save and return back to the
previous menu.
Picture mode
Press / button to select Picture Mode , then press OK button to enter sub menu. Press /
button to select (Available Picture mode: Personal, Dynamic, Standard, Mild).
You can change the value of contrast, brightness, colour and sharpness when the picture is in
PERSONAL mode.
TIPS:
You can press PMODE button on the remote control to change the
Picture Mode directly.
Contrast:
Press
/
button to select
Contrast
, then press
OK
button to enter sub menu. Press
/
button to adjust. Press
OK
to save.
Brightness:
Press
/
button
Brightness
, then press
OK
button to enter sub menu. Press
/
button to adjust. Press
OK
to save.
Colour:
Press
/
button to select
Colour
, then press
OK
button to enter sub menu. Press
/
button to adjust. Press
OK
to save.
Tint:
Press
/
button to select
Tint
, then press
OK
button to enter sub menu. Press
/
button to adjust. (The tint value is only available in NTSC signal) Press
OK
to save.
Sharpness: Press / button to select Sharpness , then press / button to adjust. Press OK
to save.
Colour Temp: Press / button to select Colour Temperature , then press OK button to enter
sub menu. Press / button to adjust. (Cold, Normal, Warm)
Noise Reduction: Press / button to select Noise Reduction , then press OK button to
enter sub menu. Press / button to adjust.
(Off, Low, Medium, High, Default)
Picture menu
Press MENU button to display the main menu.
Press / button to select PICTURE in the main menu.
22
Picture menu
Picture mode
1. Press button to select the option that you want to adjust in the PICTURE menu.
2. Press OK button to adjust.
3. MENU button to save and return back to the
previous menu.
Press button to select Picture Mode , then press OK button to enter sub menu. Press
button to select (Available Picture mode: Personal, Dynamic, Standard, Mild).
You can change the value of contrast, brightness, colour and sharpness when the picture is in
PERSONAL mode. TIPS: You can press PMODE button on the remote control to change the
Picture Mode directly.
Contrast: Press button to select Contrast, then press OK button to enter sub menu. Press
button to adjust. Press OK to save.
Brightness:
Press button Brightness , then press OK button to enter sub menu. Press
button to adjust. Press
OK
to save.
Colour: Press button to select Colour , then press OK button to enter sub menu. Press
button to adjust. Press OK to save.
Tint: Press button to select Tint , then press OK button to enter sub menu. Press
button to adjust. (The tint value is only available in NTSC signal) Press OK to save.
Sharpness:
Press button to select Sharpness , then press button to adjust. Press OK
to save.
Colour Temp:
Press button to select
Colour Temperature
, then press
OK
button to enter
sub menu. Press button to adjust. (Cold, Normal, Warm)
Noise Reduction: Press button to select Noise Reduction , then press OK button to enter
sub menu. Press button to adjust.
Press MENU button to display the main menu.
Press button to select PICTURE in the main menu.
Cold
Medium
Operating the Menu (DTV)
OK
Medium
Operating the Menus (DTV)