POWER SUPPLY FOR INFINITY
®
LIGHTING SYSTEMS
INSTALLATION GUIDE
Specifications are subject to change without notice. Every effort has been made to ensure that the information provided in this manual is accurate.
GVA Lighting Inc. is not responsible for printing or clerical errors. Refer to www.gvalighting.com for additional information.
PS-INF 3000
& PDC INF
WARNING
1.
Only qualified personnel should be permitted to install, replace, or service this equipment.
2.
Only use attachments and/or accessories specified by GVA Lighting.
3.
Follow instructions for wall, shelf, or ceiling mounting as recommended by GVA Lighting.
4.
Use properly rated and stable input voltage within the range of 100~240V. (Use of non-rated and/or unstable AC input voltage may result in
severe damage to the product.
5.
Do NOT, under any circumstance, modify or disassemble this product. Doing so may result in a fire, electric shock and/or severe damage to
the product.
6.
Do NOT touch power cables or power plugs in such circumstances as a lightning storm, as this may cause electric shock.
7.
Any severe physical impact on the product, other than what is specified by GVA Lighting, may cause certain components to fall out of place
within and break, which may cause fire or electric shock. In such an event, do not operate the product. Contact your authorized GVA Lighting
representative for support.
8.
Protect the power cord from being walked on or pinched.
9.
Do NOT destroy, process, or place the product close to any heating device as this may result in damages to the product.
10.
Do NOT bend or twist power cords, power plugs, cables, or wires with excessive force as this may result in damages to the product.
11.
Do NOT place any heavy object on the product as this may result in damages to the product.
12.
Do NOT touch power cables with wet hands and/or when the power supply is running as this may cause electric shock.
13.
Do NOT use any non-rated power sockets and/or power strips with many other devices jointly plugged in. The wire of non-designated capacity
may cause fire due to build up heat emission.
14.
In case of product malfunction or unusual events, such as electrical burning smell and smoke, immediately turn OFF and contact GVA
Lighting.
15.
Do NOT install this product in an unstable environment, such as
o
n moving objects, or on unstable surface
s
. Improper installation may result
in dismounting of the product and may result in equipment damages, fires, personal injury, and death.
16.
Do NOT install the product near a poisonous gas or chemically unstable atmosphere as it may cause fire.
17.
Do NOT install the product near a strong magnetic or electric field. It may result in equipment damages, fires, electric shock, and
personal
injury.
18.
Do NOT move or transport this product with any power cables connected to the source devices. Damages may occur to the cables, plugs, or
jointing connectors of the cables due to forcible bending and stress. This may cause damages to the waterproof seal of the product, making
it subject to fire, electric shock, or shorted circuit.
19.
When disconnecting the equipment, always hold the plugs of power cords or cables. Improper pulling of the cords or cables may cause
damages to the waterproof seal of the product. This may result in equipment damages, shorted circuits, fires, electric shock, and personal
injury.
20.
Do NOT use any other power cords or connection cables than what is recommended/provided by the manufacturer directly. Use of untested,
unauthorized, or substituted power cords and/or connection cables may be a cause for malfunction, fire, electric shock, or severe damages
to the product. Also, such use of improper or undesignated power cords or connection cables will void product warranty.
21.
Always leave the power OFF when connecting or disconnecting the power cords or connection cables to avoid electric shock or damages to
the product.
22.
Do NOT use aggressive cleaning agents, such as paint thinner or benzene to clean the exterior
of the product
. It may cause scratches on
the surface, erasing proper indications, identification labels, or instructions on the exterior, which may be a cause for misuse and
improper operation of the product.
23.
This equipment must be externally grounded using a customer-supplied ground wire before power is applied. Contact the local electrical
inspection authority or a licensed electrician if uncertain that suitable grounding is available.
24.
Do not work on the system or connect or disconnect cables during periods of lightning activity.
25.
No serviceable parts inside the product. Do not open.
GVA Lighting, Inc. 2771 Bristol Circle, Oakville, Ontario L6H 6X5
Tel: + 1 905 569 6044 Email: [email protected]
gvalighting.com
IG-PS-INF-3000, 06-06-2019
Page
4
/ 1
3
