Attaching the Universal Hitch
1) Begin by loosening the adjustment
screws on both sides. Screws need to be
loose enough for the connector yoke to
move freely. (See image 5)
2) Attach the connector as in the diagram (see
image 6). 1. Strap goes around stroller frame
tube. 2. Strap goes through the adjustable
buckle. Pull strap tight while pressing on the
adjustable buckle. 3. Lock the fixed buckle to
secure.
3) Adjust the extension arm to the suitable
length. Depress the lock button and connect the
locking hook to the connector loop. Release the
lock button and insert the locking hook back into
the lock until you hear a “click” (see image 7).
6.
5.
7.
8.
4) Adjust the extension base to the suitable
angle. Then tighten the adjustment screws.
Attention:
Please make sure that the main board is fixed in
a flat position for your child’s comfort and safety.
If you are unable to find a flat position, angle the
board slightly forward, and the suspension
system will balance the board once your child
steps upon it.
Depending on the brand of your stroller, you
may need to adjust the sequence of install-
ing your Universal Hitch as required.
Ensure that your connectors are in the
proper position and NOT able to be moved.
Summary of Contents for G+G 001
Page 1: ...UniversalHitch...
