Attaching the wheels
Detaching the wheels
Preparing the connector
Place the main board upside down on a
flat surface. Push the wheels firmly into
the intended support holes until you hear
a “click”. (See image 1)
Press and hold the metal key from the
rear of the wheel to release. Remove
wheels for cleaning, lubrication, or
storage. (See image 2)
The maximum allowable circumference for
stroller frame tube is 170 mm (6.7”).
maximum circumference
170 mm (6.7”)
Attention:
Be sure that all straps have been securely
tightened to the stroller frame tube and
are in a fixed position.
Ensure your stroller brake system is
working properly, both prior to installing the
connector, and also after the connector has
been correctly installed.
Place the Universal Hitch near the desired
position on your stroller and extend the
connector to the suitable length. The
maximum extension is 45 mm (1.77”).
1.
2.
3.
4.
Summary of Contents for G+G 001
Page 1: ...UniversalHitch...
