Guzzanti ZRW, Instruction Manual, Page: 45 / 46

6
3.1 Grease filter
a) replacement
The grease filter should be replaced at least every two
months during normal operation of the hood. The filter
can be dismantled by releasing its securing studs (Fig.
5), keeping in mind that the filter has to be protected with
your hand during releasing the studs, removing catches D
which secure the filters (Fig. 6), then you can replace the
filter and reinstall the catches and the mesh.
Fig. 5
3.2 Carbon filter
a) operation
Carbon filters (C Fig. 6) can absorb odours
until they are saturated. They cannot be
washed or regenerated and should be
replaced at least every 2 months or more
frequently in case of very intensive use.
b) replacement
- remove masking cover A (Fig. 6) together
with grease filter B,
- replace carbon filter C situated on the textile
filter B,
- install the grease filter with the carbon filter
in the hood.
Fig. 6
3.3. Lighting
The lighting system consists of 40 W power light bulb.
To replace a light bulb proceed as follows:
a) remove the masking cover A from the hood body (see section 3.1 a)
b) replace the bulb using a piece of cloth or paper for that purpose,
c) install the masking cover A.
3.4. Cleaning
When cleaning your hood never use:
- solvents or alcohols which might dull lacquered surfaces
- caustic or abrasive substances, particularly for cleaning stainless steel surfaces
It is recommended to us moist cloth and liquid neutral cleaning agents.