10
A. Remove the lower basket and then unscrew and remove the cap from the salt container.
1
B. If you are filling the container for the first time, fill 2/3 of its volume with water (around 500 ml).
2
C. Place the end of the funnel (supplied) into the hole and introduce about 2kg of salt. It is normal for a
small amount of water to come out of the salt container.
D. Carefully screw the cap back on.
E. Usually, the salt warning light will be off in 2-6 days after the salt container is filled with salt.
NOTE:
1. The salt container must be refilled when the salt warning light in the control panel comes on. Though
the salt container is filled enough, the indicator light may not black out before the salt fully dissolve. If
there is no salt warning light in the control panel (for some models), you can judge when to load the
salt into the softener by the cycles that the dishwasher had run (see the following schema).
2. If there are spills of the salt, a soak program could be run to wipe them out.
C. Fill the Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and streak free drying.
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances (e.g.
dishwasher cleaning agent, liquid detergent). This would damage the appliance.
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light on the control panel, you can judge the amount of rinse-aid by the
color of the optical level indicator „D“ located next to the cap. When the rinse-aid container is full, the
whole indicator will be dark .As the rinse aid diminishes, the size of the dark dot decreases. You should
never let the rinse aid get below 1/4 full.
As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated below.
1
2
3
4
5
6
MAX
Full
3/4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
D (Rinse-Aid indicator)
RINSE AID DISPENSER
2
1
3