![background image](http://html1.mh-extra.com/html/guzzanti/gz-8704/gz-8704_instruction-manual_2279372139.webp)
11
As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator
changes, as illustrated below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate
spotting
Empty
RINSE AID DISPENSER
2
1
3
1. To open the dispenser, turn the cap to the „open“ (left) arrow and lift it out.
2. Pour the rinse aid into the dispenser, be careful not to overfill.
3. Replace the cap by inserting it aligned with „open“ arrow and turning it to the
„closed“ (right) arrow.
The rinse aid is released during the final rinse to prevent water from forming droplets
on your dishes that can leave spots and streaks. It also improves drying by allowing
water to sheet off the dishes.
Your dishwashers are designed to use liquid rinse aids. The rinse aid dispenser is
located inside the door next to the detergent dispenser.
To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the
level indicator turns completely black. The volume of the rinse aid container is about
140ml.
Be careful not to overfill the dispenser, because this could cause over sudsing. Wipe
away any spills with a damp cloth. Don‘t forget to replace the cap before you close
dishwasher door.
Attention!
Clean up any rinse aid split during filling with an absorbent cloth to avoid excess
foaming during the next wash.
1
2
3
4
5
6
MAX
D (Rinse-Aid indicator)