![background image](http://html1.mh-extra.com/html/guzzanti/gz-8704/gz-8704_instruction-manual_2279372136.webp)
8
4. PRIOR USING FOR THE FIRST TIME
Before using your dishwasher for the first time:
A. Set the water softener
B. Pour 500ml of water inside the salt container and then fill with dishwasher salt
C. Fill the rinse aid dispenser
D. Function of detergent
A. WATER SOFTENER
The water softener is designed to remove minerals and salts from the water, which
would have a detrimental or adverse effect on the operation of the appliance. The
higher the content of these minerals and salts, the harder the water is. The softener
should be adjusted according to the hardness of the water in your area. Your local
Water Authority can advise you on the hardness of the water in your area.
Setting
The amount of salt dispensed can be set from H0 to H7.
Salt is not required at the set value H0.
1. Find out about the hardness value of your tap water. Your water utility company will
help you with this.
2. Set value can be found in the water hardness table.
3. Close the door.
4. Switch on „Power“ switch.
5. Hold down „ Delay“ button and then press “Start” button for 5 seconds.The buzzer
rings one time and H. flashes on the digital display. (factory setting is H4)
To change the setting:
1. Press „ Delay „ button.
Each time the button is pressed, the set value increasesby one level;when the value
of H7 has been reached, the display jumps back to H0 (off).
2. Press „Program“ button. The chosen setting has now been stored.
Contact your local water board for information on the hardness of your water
supply.