![background image](http://html1.mh-extra.com/html/guzzanti/gz-600b/gz-600b_manual_2279512024.webp)
CONTROL
1.
OFF motor
Pressing the button during functioning, the hood turns OFF.
2.
Speed Increase
Pressing the button the hood passes from the OFF state to speed 1.
Pressing the button (hood in ON state) the motor speed is increased from speed 1 to inten-
sive.
To each speed corresponds the ignition of the respective led.
Speed 1: 1
Speed 2: 2
Speed 3: 3
Speed 4: 4 / Intensive mode of work BOOST. Used with large amount of vapour during cook-
ing. Cooker hood automatically will switch into third speed, after 5 min. of work.
3.
Function state indicator
4.
Speed timing
5. ON/OFF lights
SPEED TIMING
Timer:
to enable programming automatic switch off at any given time between 10 and 90 minutes, with
10-minute increments.
To enable programming function, turn the engine on using the “+” button to the level you want, and
then press the button to program the switch-off time. The display will show a blinking 0, which means,
that the time programming mode was entered.
Select the automatic switch-off time using the “+” button, keeping in mind, that the number on the
display, multiplied by the 10-minut interval, means the time of automatic switch-off (e.g. 1=10 min, 2=20
min, 3=30min, etc.)
With the auto switch-off timer set, confirm the setting using the timer button, the display will stop blink-
ing and will show the previously selected speed, and the blinking dot next to the speed will show the
switch-off time. You can cancel the automatic switch-off function by pressing the timer button again
while the time is counted down.
Caution:
Timer programming should be completed within 20 sesonds, otherwise no action will be
taken, and the hood will resume operation in normal mode.
1
2
3
4
5
EN - COOKER HOOD
24