3
TEMPERATURE CONTROL
It is recommended you install the Wine Cooler in a place where the ambient temperature is
between 23º-26ºC If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing your unit in extreme cold or
hot conditions may cause interior temperatures to fluctuate. The range may not be reached.
Temperature Ranges For Your Wine Cooler
Upper zone
8 – 18 °C
ambient temperature 25°C
Bottom zone
12 – 18 °C
ambient temperature 25°C
Control panel
Temperature control
• You can turn the interior light ON or OFF by pushing the
button once.
The light will be turned off automatically if it remains ON for 10 minutes. You have to push the
button again and the light will turn back on.
• You can select temperature display setting from Celsius to Fahrenheit degree by pushing the
button for 2 seconds.
1. Your Wine Cooler has been equipped with an “automatic” control panel lock, that will activate
20 seconds after the last time a button has been touched.
Push the
button for 2 seconds to unlock the control panel.You will hear a “BEEP” sound
to alert you that the control is now active.
2. Push the
button once,you can set the upper zone temperature;
Push the
button twice,you can set the bottom zone temperature.
3. You can set the temperature as you desire by pushing the
or
button on the control
panel. The temperature that you desire to set will increase 1ºC if you push the
button
once, on the contrary the temperature will decrease 1ºC if you push the
button once.
Note
• When you use the Wine Cooler for the first time or restart the Wine Cooler after having been
shut off for a long time, there could be a few degrees variance between the temperature you
select and the one indicated on the LED readout.This is normal and it is due to the length of
the activation time. Once the Wine Cooler is running for a few hours everything will be back
to normal.
