![background image](http://html1.mh-extra.com/html/guzzanti/gz-117a/gz-117a_instruction-manual_2279487055.webp)
7
MOVING THIS COOLEr
• Unplug the appliance
• Remove all items inside
Note:
never hold the appliance by the door.
Power Failure
• If a power cut occurs, do not open the door more often than necessary in order to
conserve cold air.
TrOUBLESHOOTING
Check the following points; you may be able to solve any problem yourself.
Problem
Solution
Your Cooler does not operate.
• Check power cable is plugged in and
switched on.
• The circuit breaker has tripped or the
fuse has blown.
• The temperature control is set at „0”.
Your Cooler is too cold.
• The temperature control dial may be set
too high.
Your Cooler is not cold enough.
• Check the temperature control dial is set
at „3”.
• A higher external ambient temperature
may require a higher setting.
• The door is opened too often.
• The door is not closed completely.
• The door gasket does not seal properly.
• The Cooler does not have the correct
clearances at the sides/back.
The defrosting water overflows inside
the cooler and onto the floor.
• Check if the coolers drain pan is full.
The side panel heats up.
• This is a result of the dissipation of the
heat from inside the cabinet.
Condensation forms on the outside of
the wine cooler.
• Condensation will form on the outside
of the wine cooler if it operates in moist
areas, simply wipe it dry.
The cooler seems to make too much
noise.
• Appliance is not on a level, firm surface
or may be touching other items.
• Note it is normal to hear refrigerant
flowing as the compressor stops and
starts.