![background image](http://html1.mh-extra.com/html/guzzanti/gz-117a/gz-117a_instruction-manual_2279487054.webp)
6
CHANGING THE LIGHT BULB
Note:
all parts removed should be kept safely. You will require these for the cooler of
the door.
Before removing the light bulb, YOU MUST UNPLUG THE UNIT. FAILUrE TO
DO SO MAY rESULT IN ELECTrICAL SHOCK Or PErSONAL INJUrY.
• Remove the light bulb cover (4) by gently pulling the bottom edge of the light bulb
cover.
• Unscrew the bulb (1) Fit a 10w refrigerator bulb that is the same shape and size.
Replace the light cover.
WHEN NOT IN USE FOr LONG PErIODS
• Unplug this cooler.
• Clean and dry the inside of the appliance. Leave the door slightly open to allow it to
dry completely.
• A cooler which is unused without being cleaned may start to smell musty or develop
mildew.
DEFrOSTING
The surface of the evaporator ices up when the cooler is working. This is an entirely
normal part of operation. If the frost layer is more than 3 mm thick, the cooler must
be defrosted and cleaned to avoid unnecessary energy consumption and inefficient
operation.
• Remove all items inside and unplug the unit.
• After defrosting, clean the unit (see instructions below) and allow it to dry. Reconnect
to the mains supply and follow the directions ‘OPERATION’ on page 5.
CLEANING
To ensure efficient operation the back and bottom of the chiller should be cleaned
thoroughly.
Note:
do not use abrasive cleaners!
• Unplug your cooler.
• Wipe the interior with warm water and neutral detergent.
• Dry all surfaces thoroughly.
• Use mild soapy water to clean the door seal.