25
2) Frothing the cold milk: Pour the cold milk into the jug and push
the button for 1-2 seconds then the blue light on. After 65s the
machine finishes working, the blue light off and the red light
keeps flashing for 30s.
3) Error status: The blue light keeps flashing. It means the
machine works at an overload. You shall cut off the power
and pour out the milk(the milk level must be below the max
mark),then try to start again.3)
HINTS AND TIPS
Here are some handy hints to help you get the best out of your
frother.
• Always use your frother first to froth or heat your milk. While
it is operating prepare your coffee or hot chocolate and serve
immediately.
• Use whole milk (fat content >3.0%) for best results.
• Cold milk can be frothed with this frother. But it doesn’t mean
you can cool down the milk with it. The frother works in normal
temperature in this condition.
• Milk heats to approximately 70℃.This is the ideal temperature to
ensure the flavor of your coffee is not impaired and so you don’t
have to wait too long until you can start sipping on your drink.
• Keep the whisks in a safe place. They are small and can easily
be lost.
• After frothing or heating allow 2 minutes for the thermostat to
reset and the frother to be ready for use again. To shorten this
time, rinse with water and wipe dry after each use.
• The frother is designed to heat and froth milk. If you add
flavorings, coffee granules or hot chocolate powder in the
frother ensure you thoroughly clean immediately after using.
