5
SUPPLIED PARTS
1 Cooler box
1 Barrier strip
UNPACKING THE APPLIANCE
1. Remove the appliance from its packaging.
2. Remove all the packaging material such as
plastic bags, filler material, cable ties and
cardboard packaging.
3. Check that all parts are supplied in the
package.
NOTE:
The appliance may still contain dust or
production residues. We recommend that
you clean the appliance as described under
„Cleaning“.
INSTRUCTIONS
General information
• Never place the appliance next to naked
flames or other heat sources.
• The lid is locked when the handle is pushed
back and when carrying.
• To open the cooler box, pull the handle
forward.
• Do not open the lid more often than
required. Do not leave the lid open more
often than is necessary. This will influence
the duration of the cooling or keeping
warm.
• The duration of the cooling or keeping
warm is also dependent on the ambient
temperature.
• The appliance is not suitable for permanent
operation.
• The appliance can be connected to two
different energy sources.
- Alternating current 220 - 240 V~
or
- Direct current 12 V
• You can switch the appliance on and off
using the
ECO - OFF - MAX
and
COLD -
OFF - HOT
switches. Both switches must
be switched on at the required setting
to ensure that the appliance functions
properly.
• The respective indicator lamp will indicate
the mode:
- Green for cooling
- Red for keeping warm
• Do not switch directly from one operating
mode into the other. If you would like
to change the operating mode, turn the
appliance off. Wait about 30 minutes before
you switch it to the other operating mode.
Cooling
• You may keep cold foods cold for several
hours.
• Turn the switch to the “
COLD
“ position.
• For best results, only store already
cooled
food / beverages in the cooler. Select a
place of use that is protected from direct
sunlight.
Keeping warm
• You may keep hot food/beverages warm for
several hours, maximum 50 to 60 °C.
• Set the switch to the “
HOT
“ position.
• The Peltier element will switch off and on
at intervals to maintain the temperature.
The red control light will be lit up when the
Peltier element is in operation and when the
fan is running.
• The appliance is not designed for reheating.
Cold food will only warm up slightly after
about 2 hours.
ECO or MAX?
In order to operate the device in energy-
efficient mode, use the setting
ECO
.
