GUTMANN 11T581I, Instruction Manual, Page: 37 / 48

37
Ventilation
The cooling system is fully automatic. The cooling fan starts at a low speed when the calories
generated by the electronic system reach a certain level. The ventilation starts its high speed
level when the hob is intensively used. The cooling fan reduces its speed and stops automatically
when the electronic circuit has cooled down enough.
STARTING-UP AND APPLIANCE MANAGEMENT
Before the first use
Clean your hob with a damp cloth and then dry the surface thoroughly. Do not use detergent
because this can create a blue-tinted colour on the glass surface.
Induction principle
An induction coil is located under each heating zone. When it is working, it produces a variable
electromagnetic field which produces inductive currents in the ferromagnetic bottom plate of the
pan. The result is a heating-up of the pan located on the heating zone.
Of course the pan has to be adapted:
Sensitive touch
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
presses the key, the corresponding command is activated. This activation is validated by a
control light, a letter or a number in the display and/or a “beep” sound.
In case of normal use, press only one key at a time.
Power selection zone “SLIDER” and timer setting zone
To select the power with the “slider”, slide your finger on the “SLIDER” zone. You can already
have direct access if you put your finger directly on the chosen level.
“SLIDER“ Direct access
Power selection zone “SLIDER” and
timer setting zone