41
Recall Function
After switching off the hob [0/I], it is possible to recall the last settings.
cooking stages of all cooking zones (Booster)
minutes and seconds of programmed cooking zone-related timers
Keep warm function
Automatic cooking
The recall procedure is following:
Press the key [0/I]
Then press [ II ] before the light stops blinking.
The previous settings are again active.
“Keep warm” Function
This function allows the reach and automatically maintains at the temperature of 42, 70 or 94°C.
This will avoid liquids overflowing and fast burning at the bottom of the pan.
To engage, to start the function « Keep warm » :
Action
Control panel
Display
42°C
to engage
Press once on key [ U ]
[ U ] and [
]
70°C
to engage
Press twice on key [ U ]
[ U ] and [
]
94°C
to engage
Press 3 times on key [ U ]
[ U ] and [
]
To stop
Slide on the “SLIDER“
[ 0 ] to [ 9 ]
or press key [ U ] until [ 0 ]
[ 0 ]
The maximum duration of keeping warm is 2 hours.
Bridge Function
This function allows the use of 2 cooking zones at the same time (left zones, middle zones, right
zones) with the same features as a single cooking zone. Booster
function isn’t allowed.
Action
Control panel
Display
Activate the hob
Press display [ 0/I ]
[ 0 ]
Activate the bridge
Press simultaneously on [ U ]
[ 0 ] and [ ]
of the 2 cooking zones
Increase bridge
Slide on the
“SLIDER“
[ 1 ] to [ 9 ]
witch indicates the power
Stop the bridge
Press simultaneously on [ U ]
[ 0 ]
of the 2 cooking zones
Control panel locking
To avoid modification of the setting of the cooking zones , in particular during cleaning, the
control panel can be locked (with exception to the On/Off key [ 0/I ]).
Action
Control panel
Display
Locking the hob
Press [
] during 6s
locking light on
Unlock the hob
Press [
] during 6s
locking light off
Summary of Contents for 11C800I
Page 1: ...GEBRAUCHSANWEISUNG NOTICE D UTILISATION INSTRUCTION OF USE 11C800I ...
Page 2: ......
Page 47: ......
Page 48: ...15445 0 ...
