Gusto AMGM15 Owner'S Manual Download

Page: 4 / 12

GENERAL INSTALLATION DATA

This equipment is designed and sold for commercial use only by personnel trained and experienced
in its operation and is not sold for consumer use in and around the home nor for use directly by the
general public in food service locations.

The Gusto model griddles are equipped for use with the types of gas specified on the nameplate.

All units are shipped from the factory for use with natural gas. The unit can easily be converted for
use on propane gas: See propane gas.

-IMPORTANT-

The installation of the Appliance should conform to the NATIONAL FUEL GAS

CODE "ANSI Z223.1 - LATEST EDITION" AND ALL LOCAL GAS COMPANY
RULES AND REGULATIONS.

IN  CANADA  INSTALLATION  SHALL  BE  IN  ACCORDANCE  WITH  THE
CURRENT  CAN/CGA-B149.1  NATURAL  GAS  INSTALLATION  CODE  OR
CAN/CGA-B149.2  PROPANE INSTALLATION CODE AND LOCAL CODES
WHERE APPLICABLE.

Improper installation, adjustment, alteration, service or maintenance can cause property

damage, injury or death. Read the installation, operating and maintenance instructions

thoroughly before installing or servicing the equipment.

For your safety, do not store or use gasoline or other flammable vapors and

liquids in the vicinity of this or any other appliance. Keep the appliance area

clear and free from combustibles.

This appliance, its pressure regulator and its individual shutoff valve must be disconnected from the
gas supply piping system during any pressure testing of that system at test pressures in excess of /
PSIG (.45KPA).

This appliance and its pressure regulator must be isolated from the gas supply piping system by
closing its individual manual shutoff valve during any pressure testing of the gas supply piping system
at test pressures equal to or less than / PSIG (.45KPA). For your protection, we recommend a

qualified installing agency install this appliance. They should be familiar with gas installations and

your local gas requirements. In any case, your gas company should be called to approve the final

installation. In addition, there should be posted, in a prominent location, detailed instructions to be
followed in the event the operator smells gas. Obtain the instructions from the local gas supplier.

For your safety, if you smell gas -

Do not touch electrical switches.

2. Extinguish any open flame.

Immediately call your gas company.

KEEP THE APPLIANCE AREA FREE AND CLEAR FROM COMBUSTIBLES.

CLEARANCE

For use on non-combustible countertops only.

Combustible and non-combustible material must be at least 48" (0cm) from the top of the appliance
and 6" (50mm) from the sides and back. Adequate clearance should also be provided for proper
operation and servicing.

AIR SUPPLY

Make certain not to obstruct the flow of combustion and ventilation air. Provisions for adequate air

supply must be furnished. The legs supplied with the unit must be installed. Make certain that air
intake openings in the bottom of the appliance are not obstructed. They are essential for proper
combustion and operation of the appliance.

CAUTION