Gussi G4-RM5500, Owner'S Manual

Page: 9 / 16

9
OPERATION
.
Press
“
/
”button on the remote control to
select 4:3 pan scan/16:9.
2).Adjust
Press
“
/
”button on the remote control to
select Brightness/Contrast/Hue/Saturation/
Sharpness.
In every item using
“
/
”button to adjust
and press ENTER/SETUP button to exit.

Default SETTINGS
When selecting default function, Press
ENTER/SETUP button to reset to default.

RESET FUNCTION
Press and hold
button
for 6 seconds to
active the RESET function. The RESET
function is to be activated for the following
reasons:
Initial installation of the unit when all wiring is
completed.
OPERATION Error symbol on the display.
Once the reset button is pressed. All the
memory’s information will be lost!

SLIGHTFOG AFTER
OPERATION
Normal in colder weather. Allow radio to run for
1-2 hours, This will burn off moisture.

RADIO OPERATION
1. SWITCHING TO THE RADIO MODE
Press MODE button or in the main menu to
select RADIO mode. The following information
will appear on the display
2. SELECTING THE FREQUENCY BAND
Shortly press BAND button to select desired
band. The reception band will change in the
following order:

FM1

FM2

FM3

FM4(ORIT BAND)

If you selected Russian band the FM4 will
appear. If you selected Europe or American
band. The FM4 will not appear.
3. Selecting Frequency
During radio mode. Shortly press
/
button will activate automatic seek function. It
will search up/down a station automatically.
Press and hold
/
button for 2 seconds
till
“MANUAL” appear on the display. The
manual tuning mode is selected. In this mode
you can turn up/down a step frequency one by
one till searched a station. If both buttons
have not been pressed for 5 seconds, it will
return to seek tuning mode and “
AUTO
”
appears on the display.
4. Automatic Story & Program Scanning: